Homeowners often underestimate the importance of regular garage door maintenance services. As a responsible homeowner, you need to inspect, service, and maintain the garage door periodically to keep it working correctly, just as you need to service your car to enhance its service life. In this article, I will share different phases of garage door maintenance and services that you should stress upon.
Garage door maintenance and repair:
Before coming to the topic, it is extremely essential to understand how a garage door works and operates. Overhead garage door either roll up in multiple sections or swing up in a single solid piece of wood or metal. There is a springs system that is mounted at the center of the garage door. Most importantly, the garage door runs on metal tracks that are installed along with the walls and ceiling of the garage. Garage door services are required to replace the broken springs or damaged metal tracks.
- First of all, check the metal tracks to make sure that they are in good working position. Have a look at the mounting brackets. In the garage door service, you might need to tighten the lose screws, nuts, and bolts inside the mounting brackets. The garage door tracks should be inspected to find out any occurrences of crimps, dents, or flat spots. In case of minor problems, they can be fixed using a rubber mallet or plastic hammer. Badly damaged tracks should be replaced.
- Make sure that the tracks are aligned correctly. Ideally, the horizontal tracks should slant slightly down forward. Their direction should be adjusted to the back of the garage. For roll-up garage doors, the vertical sections of tracks should be perpendicular. If you experience that tracks are not balanced, just loosen the mounting hardware and tap the tracks to their correct position to align them.
- In the next step, you need to clean and lubricate the tracks. You can use any mild household liquid to remove the grease or dirt. The garage door rollers also need to be cleaned. After washing the garage door, wipe both the tracks and rollers using a cotton cloth to make then dry. Afterward, lubricate the rollers and tracks. You may use a lubricant spray or powdered graphite for this purpose.
- The next step of garage door maintenance services involve the garage door springs. You might need to shift the hook of spring to the next notch or hole in order to adjust their tension. Remember garage door spring adjustment and replacement cannot dangerous task which should be left to the professional garage door expert.